EV charger installation in Middle Tennessee.

Get matched with a licensed electrician to install a Level 2 home charger, for Tesla, Ford, Chevy, Hyundai and every other EV.

Free, no obligation
Licensed local electricians
Usually a call within one business day
We follow up to make sure you were taken care of

Request an electrician

Takes about a minute.

Your name

Phone Email

Street address ZIP code

Property When do you need it?

Type of work Tell us about the job

By submitting, you agree to be contacted by one licensed electrician about this job. Free service; no spam.

You're all set.

A licensed electrician will reach out, usually within one business day. We'll check in with you in a couple of days to make sure they did.

What a Level 2 install usually involves

A Level 2 charger runs on a 240-volt circuit, typically 40 to 60 amps depending on the charger. The electrician will:

Check whether your panel and service can handle the added load (a load calculation)
Run a dedicated circuit to a hardwired charger or a NEMA 14-50 outlet
Pull the permit and schedule the inspection
Recommend a panel upgrade or load-management device if your service is tight

Help us match you faster

In the details box, tell us your car or charger model, your panel size (often printed on the main breaker, like 100A or 200A), and roughly how far the panel is from where you park.

Questions

Do I need a permit for an EV charger?

In most of Middle Tennessee, yes. A new 240V circuit needs an electrical permit. A licensed electrician handles it.

Will I need a panel upgrade?

Not always. Many 200A homes can add a charger without one. Older 100A services sometimes need an upgrade or a load-management device. The electrician will check.

Hardwired or plug-in?

Both work. Hardwired chargers can often run at higher power; a NEMA 14-50 outlet makes it easy to swap chargers later. Your electrician can recommend one.

Areas & services

Licensed electricians across Madison, Nashville and Middle Tennessee.